top of page

ROTABROACH CUTTERS

Blair Tornado II Paint Shaker

Rotabroach® Annular tools cut clean, burr-free, round holes fast, unlike twist drills that push or hole saws that tear thru materials. Because they're hollow, they cut around the edge of the hole, so less work is required and no deforming of material or jagged edges occur. Multiple cutting teeth are precision ground instead of stamped like hole saws, give long tool life.

Rotabroach® Cutters are for precision holemaking in sheet metal, frame materials, and plate stock up to ½" thick, whether Mild Steel, Stainless Steel, or Aluminum. These are the same tools as those used by OEMs on assembly lines for access holes and accessory equipment installations. For body shops and frame straighteners, custom building and detailing, aftermarket installations, rustproofers and undercoaters - wherever fast, rugged, and superior quality holes are required - Rotabroach Cutters are the single answer. Patented tooth geometry also prevents chip clogging when cutting steel, sheet metal, or plastics.

Arbors fit 3/8" and 1/2" hand held drill chucks and use either spring loaded pilots or skip-proof pilots which eliminate pre-drilling operations.
 

Made in USA

* For best results always use Rotabroach
  Stick Lubricant (Part No.11750). Stick lube
  offers extended tool life and better
  cutting action.

​

Speed & Feeds for Rotabroach Cutters

Arbors for Rotabroach Cutters
11022 Rotabroach Arbor

11122 Arbor

Use with Rotabroach Cutters 1/4" to 3/4" & 6mm to 20 mm. Includes pilot & two washers. 3/8" shank.

Pilot                  11121 (3 pack)​

Washer             11656 (3 pack)

Lg Washer        11655 (3 pack)

11023 Rotabroach Arbor

11123 Arbor

Use with Rotabroach Cutters 3/8" to 3/4" & 10mm to 20 mm. Includes pilot drill & two washers. 3/8" shank.

Pilot                  11097 (3 pack)​

Washer             11656 (3 pack)

Lg Washer        11655 (3 pack)

11007 Rotabroach Arbor

11007 Arbor

Use with Rotabroach Cutters 13/16" to 1-1/2". Includes pilot & washer. 1/2" shank.

Pilot                  11628 (3 pack)​

Washer             11008 (3 pack)

Rotabroach Cutter Kits
11090 Rotabroach Cutter Kit

11090

5/16, 3/8, 7/16, 1/2, 9/16, 5/8, & 3/4" Cutters, Arbor, (2) Extra Pilots, & Center Punch

11092

8,10, 12, 14, 16, 18, 20mm Cutters, Arbor, (2) Extra Pilots, & Center Punch

11091 Rotabroach Large Diameter Cutter Kit

11091

7/8, 1, 1-1/8, 1-1/4, 1-3/8, & 1-1/2" Cutters, Arbor, Center Punch & Extra Pilot

11099 Rotabroach Master Cutter Kit

11099

16 Sizes (1/4 - 3/4") Cutters, Arbor, Center Punch & Extra Pilots

11201

16 Sizes (6mm - 20mm) Cutters, Arbor, Center Punch & Extra Pilots

11320 Rotabroch Combo Cutter Kit

11320

5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, & 1-1/2" Cutters, (2) Arbors, Center Punch & Extra Pilots

bottom of page